Raised Panel Router Bits

Trend 18/19x1/2TC Panel/Bevel A=25

£119.65 Inc VAT | £99.71 Ex VAT

Trend 18/20x1/2TC Panel/Bevel A=10

£106.37 Inc VAT | £88.64 Ex VAT

Trend 18/21x1/2TC Rad/Panel Raiser 14mm Rad

£106.37 Inc VAT | £88.64 Ex VAT

Trend 18/80x1/2TC Bearing Guided Panel/Bevel A=15

£119.65 Inc VAT | £99.71 Ex VAT

Trend 18/81x1/2TC Bearing Guided Panel/Radius 40mm Rad

£119.65 Inc VAT | £99.71 Ex VAT

Trend 18/90x1/2TC Vertical Panel Bevel 40mm Rad

£114.99 Inc VAT | £95.82 Ex VAT

Trend Router Cutter 18/24x1/2TC Ogee Panel Raiser 12mm Rad

£106.37 Inc VAT | £88.64 Ex VAT

Trend Router Cutter 18/84x1/2TC Guided Ogee Panel Raiser R22.2mm

£119.65 Inc VAT | £99.71 Ex VAT

Trend Router Cutter C150x1/2TC Raised Panel 12mm Rad x 41mm Dia

£69.69 Inc VAT | £58.07 Ex VAT

Trend Router Cutter C150x1/4TC Raised Panel 12mm Rad x 41mm Dia

£69.69 Inc VAT | £58.07 Ex VAT

Trend Router Cutter C150x8mmTC Raised Panel 12mm Rad x 41mm Dia

£69.69 Inc VAT | £58.07 Ex VAT

Trend Router Cutter C151x1/4TC Vertical Panel 22mm Rad1 x 18mm Rad2

£73.17 Inc VAT | £60.98 Ex VAT

Trend Router Cutter C169X1/2TC Bearing Guided Ogee Panel Cutter 17.5mm Radius

£79.75 Inc VAT | £66.46 Ex VAT

Trend Router Cutter C170x1/2TC Bearing Guided Bevel Panel Raiser 15 Degree

£87.11 Inc VAT | £72.59 Ex VAT

Trend Router Cutter C173x1/2TC Large Panel Raiser R12mm

£73.17 Inc VAT | £60.98 Ex VAT

Trend Router Cutter C183x1/2TC Bearing Guided 40mm Rad P/Raiser 86mm Dia

£86.30 Inc VAT | £71.92 Ex VAT

Trend Router Cutter C184x1/2TC Ogee Panel Mould 22mm Rad 86mm Dia

£93.05 Inc VAT | £77.54 Ex VAT

Trend Router Cutter C186x1/2TC Bevel Panel Raiser 10 Degree 50mm Dia

£71.50 Inc VAT | £59.58 Ex VAT

Trend Router Cutter C187x8mmTC Bevel Panel Raiser 10 Degree 41mm Dia

£66.20 Inc VAT | £55.17 Ex VAT

Trend Router Cutter Easyset Ogee Panel Door Set CR/PDS1x1/2TC

£153.20 Inc VAT | £127.66 Ex VAT

Trend Router Cutter Easyset Ogee Panel Door Set CR/PDS1x12mmTC

£153.20 Inc VAT | £127.66 Ex VAT

Trend Router Cutters CR/PDS2x1/2TC Panel Door Set Bevel Large

£166.21 Inc VAT | £138.51 Ex VAT

Raised Panel Router Cutters for Raised Panel Moulding.

Traditional panels and frame doors, formerly machined on spindle moulders, can now be produced using heavy duty routers mounted in fixed positions, either overhead or inverted.

These raised panel router cutters run best at lower speeds and match our range of profile scribers.

All are suitable for use on natural timber and MDF.

* 8mm shank router cutters are for use with medium and heavy duty routers only. *