Gatemaster Superlock Surface Fix Single Side Digital Keypad Gate Lock for Wooden Gates Right Hand.
Product Reference: BDGSWR
The Superlock BDGSW is a single-sided surface fixed digital gate lock made specifically for timber gates. It restricts outside access with a keypad, but allows you to exit the gate by just operating a rear lever handle on the inside. This lock auto-latches when you close the gate, but you can activate the hold-back function to allow the gate to remain unlocked.
Corrosion resistant – the keypad lock features marine grade keypads and powder-coated stainless steel casing
No power needed – the mechanical keypad requires no power and can be installed anywhere
Adjustable latchbolt – adjust the latchbolt in length for a precise fitting to your wooden gate
Auto-latching – close the gate and the latchbolt latches into the gate frame. To open the gate – enter the code and turn the handle
Hold-back function allows you to keep the gate unlocked when latched; activate with the switch on the rear handle
Keypad on one side and rear lever handle – this is also available with keypads on both sides
You can use the BDGSW on a minimum of 30mm thickness as standard, however you can use it on 20mm without the extenders. The maximum gate thickness is 75mm.
Variations:
BDGSWL – Left handed, keypad on one side, inward opening
BDGSWR – Right handed, keypad on one side, inward opening
BDGSWLO – Left handed, keypad on one side, outward opening
BDGSWRO – Right handed, keypad on one side, outward opening Not sure which handing to get?
Installation:
It is easy to install the BDGSW as it is a surface fixed digital gate lock. No chisels required!
Similar products can be found in these categories:
; "Gatemaster Superlock Surface Fix Single Side Digital Keypad Gate Lock for Wooden Gates BDGSWR Right Hand")
;)
;)
