|
|
| Product Description: |
Trend Professional STC Eccentric Two Flute Router Cutter from Cookson Hardware.
Product Reference: S3/81X1/2STC
These cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.
- Offer better plunge cutting characteristics than TCT.
- Many more re-sharpenings can be obtained from STC tools.
- A harder grade of carbide is used as the tool is not brazed.
- Two flute - finer finish.
- Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
- All cutters of 2mm diameter and below should have a minimum of 1.0mm depth of cut per pass.
- Small diameter cutters should be handled with care and shallow passes taken.
- Single flute cutters should not be used in eccentric chucks.
Size:
Diameter - 1/2"
Cut Length - 32.0mm
Overall Length - 77.0mm
Shank Diameter - 1/2"
|
| Similar products can be found in these categories: |
Trend Woodworking Tools
>Trend Router Bits Professional TCT
>
Trend Router Bits Professional TCT Straight
Power Tools & Accessories
>Router Bits
>
Straight Flute Router Bits
All Trend Routing & Woodworking Products
|
; "Trend Router Cutter Straight Two Flute S3/81x1/2STC 12.7mm Dia x 32mm")
;)
;)
