The Trend Mortise and Tenon Jig
Product Reference: MT/JIG
The Trend mortise and tenon jig enables mortise and tenons and dowel joints to be cut with a router.
- Ideal for cabinet, chair and table.
- CNC precision manufactured plates and body.
- One set-up for both mortise and tenon giving perfectly fitting joints.
- Fully adjustable for compound angle joints up to 45 degree.
- Reversible templates to produce round and square end tenons.
- Templates can be used for accurate dowelling applications.
- Cuts mortise & tenon sizes of 1/4 inch (6.35mm) to 5/8 inch (15.9mm).
- Guide bushes are included but cutters are required.
- A Unibase may be required for certain makes & models of router.
- All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026).
- The width of the tenon is adjusted by using different guide bush diameters.
Comes with:
- 5 x Plastic guide bushes 15.9mm, 22.2mm, 28.6mm, 30.2mm & 31.8mm
- 1 x Metal guide bush 25.4mm
- 4 x Clamps
- 1 x Guide bush collar
- 1 x Set-up Bar
How to use the Trend Mortise and Tenon Jig.
Dimensions:
Material thickness min. = 12 mm
Material thickness max. = 47 mm
Tenon thickness min. = 4.8 mm
Tenon thickness max. = 16 mm
Tenon width max. using vertical guide+ = 90 mm
Mortise length max. using vertical guide++ = 90 mm
Angle tilt compound = -10 degree to 45 degrees
+ on end of 100 mm wide material.
++unlimited if vertical guide removed and wood repositioned.
| 
; "Trend MT/JIG Mortise & Tenon Jig Imperial")
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
