Trend Adjustable Trade Lock Jig.
Product Reference: LOCK/JIG/B
Adjustable sliding inserts to allow face-plate and mortise recesses for popular size door locks to be routed.
- Fully adjustable for lock face plate length up to 250mm.
- Quick and easy to set up using engraved lines for lock size and door sizes.
- Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths.
- Engraved on underside to allow set up for 35mm, 40mm, 44mm and 54mm door widths.
- Deeper mortises can be achieved with a suitable size of auger bit.
- Fast, clean and accurate results on doors 34mm to 54mm thick, even in hardwood.
- Plastic laminate body with aluminium clamping bar.
- Includes a pair of setting blocks for specific lock widths and to aid door centring.
- The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 10mm spigot, 12mm diameter long reach cutter and two quick action clamps.
Comes with:
Dimensions:
Door thickness min. = 30mm
Door thickness max. = 80mm
Faceplate length min. = 30mm
Faceplate langth max. = 250mm
Face Plate Dimension Widths
22.5mm
25.4mm (1 inch)
Mortise Dimension Widths
16mm (5/8 inch)
19mm (3/4 inch)
Guide to using the Trend Lock Jig.
|
; "Trend Adjustable Trade Lock Jig LOCK/JIG/B")
;)
;)
;)
;)
;)
;)
