This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensures flutes of drill are aligned with flutes of countersink. Do not overtighten screw. Not suitable for production applications and not suitable for ferrous and non-ferrous metals.
Dimensions:
C=12 mm
OL=32 mm
A=45 degrees
Cut Length Metric: 12
Overall Length Metric: 32
Angle: 45
|
Go To Home Page
