Trend Professional STC Eccentric Single Flute Router Cutter from Cookson Hardware.
Product Reference: S2/6X1/4STC
These cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.
-
Offer better plunge cutting characteristics than TCT.
-
Many more re-sharpenings can be obtained from STC tools.
-
A harder grade of carbide is used as the tool is not brazed.
-
Single flute - fast feed rate.
-
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
-
All cutters of 2mm diameter and below should have a minimum of 1.0mm depth of cut per pass.
-
Small diameter cutters should be handled with care and shallow passes taken.
-
Single flute cutters should not be used in eccentric chucks.
Size:
Diameter - 1/4"
Cut Length - 10.0mm
Shank Diameter - 1/4"
Go To Home Page
