A self-guided combination trimmer.
A 90 degree trim is obtained by engaging the bottom half.
A 45 degree trim is obtained by lowering the cutter.
A fine height adjuster is recommended when using this cutter.
A larger 20mm bearing will spread the wear of the cutting when 45 degree trimming.
Dimensions:
D=24 mm
C=6 mm
C2=5 mm
C3=6 mm
B=Fractionally larger than cutter dia
A=90 degrees,
A2=45 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 24
Cut Length Metric: 6
Angle: 90
|
Go To Home Page
