Use for bevelling and chamfering.
A flat, approximately 1.0mm, will be found on V Groove tip.
Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board.
Dimensions:
D=9.5 mm
C=5.0 mm
C2=6.5 mm
OL=45 mm
A=45 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 9.5
Cut Length Metric: 5.0
Angle: 45
|
Go To Home Page
