The Trend Routabout Jig
Product Reference RBT/4
Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians.
A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 22mm chipboard or similar floors.
- Cuts only the thickness of the board.
- No waste, the piece cut out is used to make good the floor.
- All you need is a plunge router (750 watts or above). A Unibase may be required for certain makes and models of router.
Please refer to UK Building Regulations Approved Document B and any amendments before using this accessory.
Dimensions:
Shank Diameter=1/2 inch
Floor thickness=22 mm
Access hole diameter=250 mm
Cut Length Metric: 22
How to Guide to the Trend Routabout Jig.
|
Go To Home Page
