Trend MT/JIG/EURO Mortise & Tenon Jig Euro Metric

The Trend Euro Mortise and Tenon Jig

Product Reference: MT/JIG/EURO

The Trend Euro mortise and tenon jig enables mortise and tenons and dowel joints to be cut with a router.

• Ideal for cabinet, chair and table.
• CNC precision manufactured plates and body.
• One set-up for both mortise and tenon giving perfectly fitting joints.
• Fully adjustable for compound angle joints up to 45 degree.
• Reversible templates to produce round and square end tenons.
• Templates can be used for accurate dowelling applications.
• Cuts mortise & tenon sizes of 6mm to 16mm.
• Guide bushes are included but cutters are required.
• A Unibase may be required for certain makes & models of router.
• All tenons are cut with a 16mm diameter straight cutter (Ref. C025B).
• The width of the tenon is adjusted by using different guide bush diameters.

Comes with:

• 5 x Guide bushes sizes 15.9mm, 22mm, 26mm, 28mm & 32mm
• 1 x Metal guide bush 30mm
• 4 x Clamps
• 1 x Guide bush collar
• 1 x Set-up Bar

How to use the Trend Euro Mortise and Tenon Jig.

Dimensions:
Material thickness min. = 12 mm
Material thickness max. = 47 mm
Tenon thickness min. = 4.8 mm
Tenon thickness max. = 16 mm
Tenon width max. using vertical guide+ = 90 mm
Mortise length max. using vertical guide++ = 90 mm
Angle tilt compound = -10 degree to 45 degrees

+ on end of 100 mm wide material.
++unlimited if vertical guide removed and wood repositioned.