Trend Honing Guide CraftPro CR/DWS/HG

Trend CraftPro Honing Guide.

Product Reference: CR/DWS/HG

The Trend CraftPro honing guide.ensures the correct angle is maintained on bevel edge chisels and plane irons when used with diamond whetstone.

• Roller with alloy body which self-centre clamps bevel edge chisels from 1/4 inch (6.35mm) to 1-1/4 (32mm) and plane irons up to 2- 9/16 inch (65mm) wide.
• The setting device is marked for 25 degree and 35 degree angles.
• Positive location for roller and blade.
• Adjustable stop for setting blade angle.
• Use with 63mm (2 1/2 inch) wide x 178mm (7 inch) long bench stones or workshop stones.
• Not for use with Firmer chisels or short blade (Butt) chisels.

Dimensions:
Chisel blade width min.=6.35 mm
Chisel blade width max.=32 mm
Plane blade width max.=65 mm
Plane blade width min.=35 mm
Angle=25 deg & 30 deg